The standard outlines the technical and safety criteria for wooden bedside tables intended for household use, detailing aspects such as materials, dimensions, construction, finishing, and environmental standards. It guides manufacturers, suppliers, and quality assurance teams in adhering to Indian regulations, including provisions for ECO Mark certification to encourage sustainable production.
Overview
The standard outlines the technical and safety criteria for wooden bedside tables intended for household use, detailing aspects such as materials, dimensions, construction, finishing, and environmental standards. It guides manufacturers, suppliers, and quality assurance teams in adhering to Indian regulations, including provisions for ECO Mark certification to encourage sustainable production.
Audience
Contents
Structure
This section defines the range of wooden bedside tables covered, specifying applicable materials, dimensional criteria, finishing standards, and the mutual agreement requirements between purchaser and supplier. It includes rounding rules for measurement values and mandates finishing products to meet Indian Standards.
Clarifies key terms used in the standard, referencing definitions from related IS codes for veneered plywood and specifying dimensional tolerances such as the permissible difference between rectangular diagonals. It also outlines purchaser information requirements to ensure clear communication.
Details the types of timber and wood-based panels allowed, their seasoning and moisture content criteria, preservation treatments for durability, and standards for paints and finishes. It references relevant IS codes for timber classification, adhesives, and strength and stability testing.
Specifies allowable size ranges for bedside tables along with tolerances, particularly the maximum acceptable difference between the two diagonals to maintain rectangularity. It emphasizes adherence to finishing standards and purchaser-supplier agreement on dimensions.
Outlines construction requirements including use of IS-approved adhesives and joinery methods. It mandates strength and stability testing per IS 5967 and details assembly procedures including the use of glue and screws, pilot hole drilling, and provisions for knocked down product supply with complete assembly instructions.
Defines testing protocols for evaluating the mechanical strength and stability of bedside tables, referencing IS 5967 parts for test levels and acceptance criteria. It ensures that tables withstand specified loads without defects and maintain stability under applied forces.
Specifies finishing requirements, including standards for air-drying and stoving paints, enamels, varnishes, and polishes. It details surface resistance tests against heat, oils, liquids, and mechanical damage, with minimum rating criteria per IS 5807 parts to guarantee durability.
Elaborates on the performance benchmarks for finishes, emphasizing conformity to IS 2338 and resistance tests for marking by liquids and mechanical abrasion. It includes minimum acceptable ratings and references additional clear finish test methods.
Describes the additional criteria for obtaining the ECO Mark certification, highlighting required compliance with specific IS codes for particle board, MDF, and plywood. It mandates submission of documentary proof to BIS to promote environmentally responsible manufacturing.
Details marking protocols including optional use of the BIS Standard Mark under BIS supervision. It emphasizes requirements for surface resistance to oils and liquids, adherence to the BIS Act, and continuous conformity monitoring.
Lists the information buyers must provide when ordering bedside tables, such as type, size, finish preferences, allowance for alternative construction methods, and whether knocked down supply is required. It also reiterates rounding conventions for test values.
Frequently Asked
The standard permits the following materials for manufacturing bedside tables: decorative veneered particle board complying with IS 3097-1980, commonly featuring figured teak as the timber veneer; wood particle board conforming to IS 3087-1985, utilizing BWR-grade adhesives like phenol-formaldehyde; and medium density fibreboard (MDF) meeting IS 12406:1988 with distinctions between interior grade (IGSB) for air-dried finishes and exterior grade (EGSB) for oven-dried finishes. These materials ensure structural integrity, finish quality, and adherence to environmental guidelines.
According to the standard, wooden bedside tables should have maximum dimensions generally up to 450 mm in length, width, and height, with flexibility for length based on purchaser requirements. The tables must be rectangular, with a maximum allowable difference of ±5 mm between the two diagonals to maintain squareness. This tolerance ensures dimensional accuracy and proper fit in residential settings.
Surface finish durability is assured through standardized testing as per IS 5807 parts. Resistance to wet heat is assessed under Part 2 with a minimum rating of 7, oils and fats resistance is evaluated according to Part 3, requiring conformity to specified clauses, liquid marking resistance is tested under Part 4 with a minimum average rating of 8, and mechanical damage resistance—including impact, cross-cut, and scrape tests—is performed following Part 6 with ratings aligned to clause 5.3. These tests collectively verify that finishes withstand typical household stresses.
The standard mandates strength testing at Test Level 1 following IS 5967 (Part 1)-1988, where tables must exhibit no defects such as fractures or permanent deformation post-test. Stability testing is performed as per IS 5967 (Part 2)-1988 to confirm that tables remain stable under prescribed loads without tipping or excessive sway. These tests guarantee safe and durable bedside furniture.
To qualify for the ECO Mark, a bedside table must first comply with IS 6188 and bear the BIS Standard Mark, verifying material, construction, and finish standards. Additionally, it must meet environmental criteria outlined by the ECO Mark scheme, including usage of sustainable materials such as certified wood and eco-friendly MDF, low-emission finishes and adhesives, and environmentally conscious manufacturing processes. Manufacturers must obtain an ECO Mark licence from BIS, which includes continuous surveillance to ensure ongoing compliance.
Ask AI about any clause, requirement, or provision in IS 6188. Get instant, clause-cited responses powered by our indexed library.
Free tier includes 150 queries (50 AI + 100 Reference) · No credit card required