This standard outlines the specifications and design criteria for plywood containers intended for packaging tobacco for overseas shipment. It details the required materials, sizes, assembly techniques, packing procedures, and labeling to guarantee the protection of tobacco during transit and adherence to export regulations. The standard is crucial for producers and exporters seeking robust and export-compliant packaging.
Overview
This standard outlines the specifications and design criteria for plywood containers intended for packaging tobacco for overseas shipment. It details the required materials, sizes, assembly techniques, packing procedures, and labeling to guarantee the protection of tobacco during transit and adherence to export regulations. The standard is crucial for producers and exporters seeking robust and export-compliant packaging.
Audience
Contents
Structure
Frequently Asked
Per the standard, plywood utilized for case fabrication must be BC type with WWR Grade according to IS: 303-1975, having a minimum thickness of 6 millimeters. Additionally, battens accompanying the plywood should be well-seasoned with moisture content not exceeding 15%, free from defects such as knots or decay, ensuring durability suitable for export packing.
The specified external measurements for the plywood containers are 1200 mm in length, 750 mm in width, and 750 mm in height. Internally, the usable space measures 1137.5 mm by 737.5 mm by 737.5 mm. Also, the plywood thickness must be at least 6 mm, with battens conditioned to have moisture content at or below 15%. Ventilation or handling holes of 6 mm diameter are to be drilled on all sides.
Battens must be well-seasoned with a moisture content less than or equal to 15% on an oven-dry basis and free from defects like decay or insect damage. They are fastened to plywood using countersunk head nails of at least 2 mm diameter and 30 mm length, with each batten secured by 14 to 16 nails. Additionally, grooves and 6 mm holes should be drilled on battens and panels to facilitate assembly and ventilation.
The cases should be constructed from plywood of BC type and WWR Grade with a minimum thickness of 6 mm. Inside, a suitable liner approved by both buyer and seller must be placed. Tobacco is packed in layers and compacted firmly using a thick wooden plank to reach approximately 200 kg net weight. After filling, the liner is folded, and the top is closed with a prepared top panel. Sealing is done by tightly wrapping the case with three to four aluminium or gerrard wires to secure the contents during transport.
The standard mandates that cases be marked on at least two opposing sides with indelible ink showing the tobacco manufacturer's name or trademark, destination port, customer's grade, package serial number, gross weight, tare weight, and net weight. Additional markings may be required by the buyer or destination country regulations to ensure proper identification and compliance during export.
Ask AI about any clause, requirement, or provision in IS 7992. Get instant, clause-cited responses powered by our indexed library.
Free tier includes 150 queries (50 AI + 100 Reference) · No credit card required