The 1985 edition of IS 11594 outlines the specifications for mild steel thin-walled sampling tubes and sampler heads utilized in direct soil sampling using open drive tube samplers. It details the materials, dimensions, manufacturing processes, and marking protocols necessary to provide dependable and standardized equipment for geotechnical soil investigations. This code is crucial for professionals engaged in soil testing and foundation-related engineering.
Overview
The 1985 edition of IS 11594 outlines the specifications for mild steel thin-walled sampling tubes and sampler heads utilized in direct soil sampling using open drive tube samplers. It details the materials, dimensions, manufacturing processes, and marking protocols necessary to provide dependable and standardized equipment for geotechnical soil investigations. This code is crucial for professionals engaged in soil testing and foundation-related engineering.
Audience
Contents
Structure
Frequently Asked
According to IS 11594 Clause 3.1 and Table 1, sampling tubes are to be made from mild steel with a smooth finish, conforming to IS 1239 (Part 1) 1979. Cutting shoes must be fabricated from mild steel that is case hardened to a hardness of 45-50 HRC with a smooth surface, complying with IS 4432 - 1967. Sampler heads are constructed from mild steel as per IS 226 - 1975. These material specifications ensure durability, surface quality, and adequate hardness for effective soil sampling.
IS 11594 defines standard internal diameters for thin-walled sampling tubes as 40 mm, 65 mm, 80 mm, and 100 mm. All dimensional measurements must adhere to a tolerance of plus or minus 0.5 mm to guarantee interchangeability and consistency. These standards ensure precise fitment with sampler heads and maintain sampling accuracy.
The standard requires cutting shoes to be made of mild steel subjected to a case hardening process to achieve a surface hardness between 45 and 50 HRC. This treatment, as specified in IS 4432 - 1967, ensures a wear-resistant cutting edge with a smooth finish, providing durability and efficient soil penetration during sampling.
Per IS 11594 Clause 6.1, each part must be clearly and permanently marked with the manufacturer's name or registered trademark and the size and length of the component. Additionally, Clause 6.1.1 permits the inclusion of the ISI Certification Mark, indicating conformity with Indian Standards and quality assurance under ISI supervision. These markings facilitate traceability and ensure compliance.
IS 11594 ensures compatibility by establishing uniform specifications for the dimensions, threading, and materials of thin-walled sampling tubes and sampler heads tailored for use with open drive tube samplers. The standardization allows components from different manufacturers to be interchangeable, while the thin wall design minimizes soil disturbance, resulting in representative sampling aligned with open drive sampler requirements.
Ask AI about any clause, requirement, or provision in IS 11594. Get instant, clause-cited responses powered by our indexed library.
Free tier includes 150 queries (50 AI + 100 Reference) · No credit card required