Standard Specifications and Code of Practice for Prime and Tack Coat (Second Revision)
IRC 16-2004 provides comprehensive specifications and code of practice for prime and tack coats used in road construction, focusing on ensuring surface evenness and roughness standards for highway pavements. It guides engineers on measurement techniques, calibration of instruments like bump integrators, and permissible limits for surface unevenness and roughness to maintain road quality and riding comfort.
11Sections
179Clauses Indexed
✓AI Search Ready
2004Edition
Roads and Bridges IRC- Indian road congress Category
IRC 16-2004 provides comprehensive specifications and code of practice for prime and tack coats used in road construction, focusing on ensuring surface evenness and roughness standards for highway pavements. It guides engineers on measurement techniques, calibration of instruments like bump integrators, and permissible limits for surface unevenness and roughness to maintain road quality and riding comfort.
Audience
Who Uses This Standard
Highway Design Engineers
Pavement Construction Supervisors
Quality Control Inspectors
Road Maintenance Planners
Civil Engineering Consultants
Transportation Infrastructure Authorities
Research and Development Specialists in Road Engineering
Contents
Key Topics Covered
✓Measurement of surface evenness using straight edge and rod and level methods
✓Use and calibration of bump integrators for roughness measurement
✓Recommended maximum permissible surface unevenness values
✓Surface roughness classification and permissible limits
✓Standards for different types of road surfacing materials
✓Procedures for ensuring riding quality and level of service
✓Impact of vehicle speed and load on roughness measurement
✓Calibration techniques including MERLIN and rod and level methods
✓Frequency limits for surface unevenness over specified road lengths
✓Guidelines for mechanized versus manual construction tolerances
✓Interpretation of roughness values for maintenance decisions
✓Equipment specifications for surface evenness and roughness measurement
Structure
Table of Contents
1Introduction▼
Detailed content not available.
2Measurement of Surface Evenness▼
Detailed content not available.
3Measurement of Surface Roughness▼
Detailed content not available.
4Recommended Standards for Surface Evenness of Highway Pavements▼
Detailed content not available.
5Recommended Standard for Roughness Values▼
Detailed content not available.
6Calibration of Bump Integrator▼
Detailed content not available.
7Equipment and Procedures▼
Detailed content not available.
8Guidelines for Surface Quality Control▼
Detailed content not available.
9Frequency Limits for Surface Unevenness▼
Detailed content not available.
10Interpretation of Roughness Data▼
Detailed content not available.
11Annexures: Calibration Equipment Descriptions▼
Detailed content not available.
Frequently Asked
Popular Questions About IRC 16
?What are the maximum permissible surface unevenness values for different pavement types?▼
Detailed answer not available.
?How is surface roughness measured and classified according to IRC 16?▼
Detailed answer not available.
?What equipment is recommended for measuring road surface roughness?▼
Detailed answer not available.
?How should bump integrators be calibrated to ensure accurate roughness readings?▼
Detailed answer not available.
?What impact do vehicle speed and load have on roughness measurements?▼
Detailed answer not available.
✦
Need Detailed Clause Answers?
Ask AI about any clause, requirement, or provision in IRC 16. Get instant, clause-cited responses powered by our indexed library.